Skip to content

Protection system retrofit on a hydro unit

At a hydropower plant we replaced an old machinery protection system with a Bently Nevada 3500 system and System 1 software, from cabinet assembly to functional tests.

Project details

Client
TAURON
Industry
Hydropower
Location
Poland
Year
2025–2026
  1. 01

    Challenge

    The hydro unit was protected by an old system that had to be replaced as a whole. The new installation was to cover both machine protection and vibration monitoring.

  2. 02

    Scope of work

    • Replacement of the whole protection system with a Bently Nevada 3500 system
    • System 1 Evolution software for vibration monitoring
    • Assembly of the system in the cabinet
    • All field cabling
    • Installation of measurement chains and vibration sensors
    • Commissioning, configuration and functional tests
  3. 03

    Solution

    We assembled the 3500 rack in its cabinet, ran all the field cabling and installed the measurement chains: vibration sensors with their probe drivers in field junction boxes.

    After installation we configured the 3500 system and System 1 Evolution, commissioned them and tested the protection and vibration monitoring functions.

  4. 04

    Results

    • The old protection system replaced by a 3500 system with System 1 Evolution
    • Protection and vibration monitoring functions commissioned and functionally tested
    • A complete installation: cabinet, field cabling, measurement chains and sensors

Equipment and technologies

  • Bently Nevada 3500
  • System 1 Evolution
  • Cabinet preparation before the rack was installed
  • Cabinet wiring; signal markers blurred
  • Measurement chains: probe drivers in a field junction box

Need a diagnosis or a quote?

Basic machine data and a short description are enough.