Skip to content

Inspections and condition assessment

We assess the condition of rotating machinery before the overhaul scope is decided.

We combine measurements, inspections and operating data analysis to show which work is needed now and which can be planned for later.

Scope

What the service covers

Methods are chosen to suit the machine and the question the assessment needs to answer — for example whether an overhaul is necessary, what its scope should be and when to do it.

  • Review of operating history and monitoring data
  • Vibration measurements and diagnostics
  • Visual and borescope inspections
  • Non-destructive testing (NDT) of selected components
  • Assessment of condition and risk of continued operation
  • Recommended overhaul scope and timing

When to call us

Typical situations

  • Overhaul planning

    Setting the scope before ordering work and parts.

  • Extended operation

    Deciding whether the machine can run until the next outage.

  • Worrying trends

    Parameter changes with no clear cause.

  • Purchase or takeover

    Assessing a machine before taking over an installation.

  • After an event

    Assessing the effects of a failure, overload or abnormal operation.

  • Limited budget

    Choosing the work with the greatest effect.

Recognise one of these symptoms? An analyst will help find the cause.

Outcome

What you get

  • Assessment report

    The machine's condition based on measurements and inspections.

  • List of issues

    Abnormalities found, rated by significance.

  • Recommendations

    Scope of work and when to carry it out.

  • A baseline

    Data to compare against in future assessments.

Process

How we work together

  1. 01

    Request

    Machine, purpose of the assessment, available data.

  2. 02

    Data review

    Operating history, trends, earlier reports.

  3. 03

    Measurements and inspections

    Site work, in operation or during an outage.

  4. 04

    Assessment

    Analysis of results and condition assessment.

  5. 05

    Report

    Findings and recommended scope of work.

  • 2026

    ORLEN Termika – Żerań CHP · Poland

    Assessment of the dynamic condition of turbine set TZ13 under the protection-systems frame agreement.

  • 2025

    Eustream, gas compressor stations · Slovakia

    Inventory and assessment of the protection and monitoring systems on gas-turbine-driven compressor units.

  • 2024

    Food & beverage plant, Poland

    Vibration monitoring installed on the generator of an engine-driven generating set to assess its dynamic condition.

  • 2024

    ORLEN Termika – Żerań CHP · Poland

    Condition assessment of turbine set TG-13 before and after its major overhaul.

  • 2023

    ANWIL, Włocławek · Poland

    Measurements and an expert opinion on the current and expected condition of the gas turbine T-2101 rotor.

  • 2023

    ORLEN Lietuva, Mažeikiai refinery · Lithuania

    Assessment of the dynamic condition of turbine-generator set TG1.

  • 2023

    ORLEN Lietuva, Mažeikiai refinery · Lithuania

    Inventory and assessment of the machinery protection, monitoring and diagnostic systems in one area of the refinery.

Frequently asked questions

Didn't find your answer? Ask an engineer →

Does a condition assessment require disassembly?

Not always. Part of the assessment is based on measurements during operation and data analysis. Internal inspections and NDT usually require an outage and partial disassembly.

How is a condition assessment different from vibration diagnostics?

Vibration diagnostics is one of the assessment methods. A condition assessment combines it with inspections, testing and a review of the history to answer the question of overhaul scope and timing.

Can you use our earlier reports?

Yes. Earlier reports, monitoring data and overhaul records are a valuable reference for the assessment.

Need a diagnosis or a quote?

Basic machine data and a short description are enough.