From measurements and scans of the original we prepare a model and drawings, select the material, then manufacture and inspect the new part.
Scope
What the service covers
The result is not only a finished part but also documentation that lets you order it again without repeating the measurements.
- Measurement and 3D scanning of the original part
- CAD model and drawings
- Material testing and selection
- Part manufacturing
- Dimensional inspection and NDT
- Documentation for repeat orders
When to call us
Typical situations
Discontinued part
The machine manufacturer no longer offers the part.
No documentation
No drawings, only a worn part.
Manufacturer gone
A machine with no manufacturer support.
Long lead time
Waiting for the original part is unacceptable.
Recurring damage
A part with a better-suited material is needed.
Spare parts
Documentation for ordering parts in future.
Recognise one of these symptoms? An analyst will help find the cause.
Outcome
What you get
A new part
Made from the reproduced documentation.
Model and drawings
Documentation for future orders.
Material selection
A material suited to the operating conditions.
Inspection records
Measurement and test results for the finished part.
Process
How we work together
- 01
Inquiry
Part, machine, operating conditions, photos.
- 02
Measurement
3D scanning and measurement of the sample.
- 03
Documentation
CAD model, drawings, material selection.
- 04
Manufacture
Production of the part.
- 05
Inspection and delivery
Measurements, NDT, documentation.
Related services
Typical machines
Other rotating machinery? Ask us →
Frequently asked questions
Didn't find your answer? Ask an engineer →
When a part is made through reverse engineering, will we receive a 3D model and drawings?
As part of reverse engineering, we can prepare a 3D model, manufacturing drawings and other agreed materials needed to produce the part again. The scope of the technical documentation and the terms of its handover are set out in our quotation. Well-prepared documentation makes it easier to order further parts later without recreating the geometry.
Can reverse engineering produce a part without the manufacturer's documentation?
In many cases, yes. We start recreating a machine part by measuring the existing component and assessing its function in the assembly. On this basis, the geometry and manufacturing documentation can be developed. For critical parts, the material, heat treatment, tolerances and strength requirements also need to be verified: a 3D scan alone is not always enough.
Can a worn or damaged machine part be recreated?
Yes, provided the remaining material allows the component's design features to be recreated reliably. Reverse engineering of worn parts must account for material loss and distortion, and sometimes also requires measurements of mating parts. Before manufacturing, we assess whether the original geometry and the key technical requirements can be recreated.
What are the stages of recreating machine parts through reverse engineering?
Reverse engineering of machine parts begins with assessing the available component, measuring it and establishing its function in the assembly. Next, the 3D geometry and manufacturing documentation are developed, and the material, tolerances and manufacturing requirements are verified. Once the part has been made, the agreed quality checks are carried out. For critical components, recreating the shape alone is no substitute for strength analysis and confirmation of the material properties.
How can a turbine blade be recreated without the original technical documentation?
Recreating a turbine blade requires precise measurement of the part's geometry and analysis of how it fits the blade ring and the fastening elements. The material, manufacturing requirements and operating conditions also need to be established. If the sample is worn, measurements of several blades or of mating parts help. The reverse engineering documentation should specify tolerances and inspection methods; feasibility is assessed case by case.
Is 3D scanning enough to recreate a machine part?
3D scanning captures a part's external geometry quickly, but it does not provide all the data needed for manufacture. It does not automatically determine the material, heat treatment, fit tolerances or strength requirements. In reverse engineering, scanning is supplemented by metrological measurements, design analysis and manufacturing documentation. The extent of verification depends on the part's function and the consequences of a possible failure.
How is the material chosen for a recreated industrial machine part?
Choosing the material requires establishing the loads, operating temperature, environment and manufacturing technology for the part. Where the manufacturer's documentation is not available, material identification of the available sample and analysis of its wear can help. For critical parts, strength and fatigue properties and corrosion resistance must be taken into account. A material should not be substituted on the basis of similar appearance or hardness alone.
When is reverse engineering a better choice than buying OEM parts?
Reverse engineering is worth considering when original OEM parts are unavailable or have long lead times, or when the documentation for an older machine needs to be recreated. The decision, however, depends on the criticality of the component, the rights to the documentation, the material requirements and the ability to control quality. For parts on which safe operation depends, their technical suitability must be confirmed before installation.
Is the original part needed to reproduce it?
Usually, yes — measuring and scanning the original is the basis for reproduction. Photos, fragments of documentation and operating data also help.
Need a diagnosis or a quote?
Basic machine data and a short description are enough.