Skip to content

Vibration sensors and measurement chains

We select, install and verify vibration, axial position and speed sensors together with the complete measurement chain.

A reliable sensor signal is the basis for protection, monitoring and diagnostics.

Scope

What the service covers

We handle single measurement chains as well as a machine's complete instrumentation — for new installations, upgrades and machines in service.

  • Sensor selection for the machine and measurement task
  • Sensor installation and cable routing
  • Gap setting for eddy-current probes
  • Verification of measurement chains and signals
  • Calibration checks and documented results
  • Replacement of faulty chain components

When to call us

Typical situations

  • Unreliable readings

    Spikes, dropouts or frozen signal values.

  • False alarms

    Alarms or trips caused by the measurement chain, not the machine.

  • After a machine overhaul

    Refitting and setting up the sensors.

  • New installation

    Instrumenting the machine before commissioning.

  • System upgrade

    Assessing which sensors and cables can be kept.

  • Periodic inspection

    Confirming that the chains work in service.

Recognise one of these symptoms? An analyst will help find the cause.

Outcome

What you get

  • Working measurement chains

    Sensors installed and set up to requirements.

  • A reliable signal

    Measurements that protection and diagnostics can rely on.

  • Test records

    Verification results for every measurement chain.

  • Recommendations

    Parts to replace or improve, if any are found.

Process

How we work together

  1. 01

    Request

    Machine, sensor types, description of the problem.

  2. 02

    Preparation

    Sensor selection and verification scope.

  3. 03

    Site work

    Installation, setup, signal measurements.

  4. 04

    Verification

    Checking the chains and their readings.

  5. 05

    Report

    Results, recommendations, documentation.

Power generation · 2025–2026

3500 system upgrade on a gas turbine

Budapesti Erőmű, Budapest

  • Support for Bently Nevada systems
  • Vibration sensors and measurement chains
  • DCS / SCADA / OPC / Modbus integration
Read case study

Related projects

Frequently asked questions

Didn't find your answer? Ask an engineer →

What does a measurement chain include?

The sensor, extension cable, driver or signal conditioner, cabling and the input of the monitoring module. A fault in any of them affects the reliability of the measurement, which is why we verify the whole chain.

Do you work with sensors from different manufacturers?

Yes. We verify and service measurement chains in existing installations regardless of manufacturer, provided the sensors' technical data is available.

Can verification be done with the machine running?

Some checks, such as signal assessment, can be done during operation. Setting gaps and replacing sensors usually require the machine to be stopped.

Need a diagnosis or a quote?

Basic machine data and a short description are enough.