Skip to content

Technical support for Bently Nevada systems

Independent technical support for installed Bently Nevada 3500, Orbit 60 and System 1 systems.

From diagnostics and configuration to upgrades, integration and service.

Scope

What we offer

We work with Bently Nevada protection and monitoring systems at power and industrial sites. We have Bently Nevada training.

  • 3500 and Orbit 60 systems
  • System 1 software
  • 3300 XL measurement chains and sensors
  • Diagnostics, configuration and troubleshooting
  • Upgrades and DCS integration
  • Service and inspections of installed systems

When to call us

Typical situations

  • Module alarms and faults

    Faults in modules, channels or power supplies.

  • False trips

    Protection trips with no mechanical cause.

  • Configuration after changes

    New measurement points, changed setpoints.

  • System 1 migration

    Moving from an older software version.

  • DCS integration

    Data exchange over Modbus or OPC.

  • No support in place

    An installation without a current service contract.

Recognise one of these symptoms? An analyst will help find the cause.

Scope of work

What support covers

  • System diagnostics

    Modules, measurement chains, power, communication.

  • Configuration

    Setpoints, channels, alarms, protection logic.

  • Software

    System 1 configuration and data analysis.

  • Integration

    DCS, SCADA, Modbus, OPC.

Process

How we work together

  1. 01

    Request

    System, versions, symptoms.

  2. 02

    Remote analysis

    Configuration, logs, data.

  3. 03

    On-site work

    Diagnosis and fault rectification.

  4. 04

    Verification

    Tests of measurement chains and protection functions.

  5. 05

    Documentation

    Report and recommendations.

Power generation · 2025–2026

3500 system upgrade on a gas turbine

Budapesti Erőmű, Budapest

  • Support for Bently Nevada systems
  • Vibration sensors and measurement chains
  • DCS / SCADA / OPC / Modbus integration
Read case study

Related projects

  • 2026

    AB Achema, Jonava · Lithuania

    Modules for the existing 3500 protection systems.

  • 2026

    AB Achema, Jonava · Lithuania

    Supply of a new Orbit 60 protection and vibration monitoring system.

  • 2026

    ANWIL, Włocławek · Poland

    Inspection of the Bently Nevada measurement systems on compressors PC112, NPC C9051, MAC C9011 and BAC C9012.

  • 2026

    Enefit Power – Auvere Power Plant · Estonia

    Spare parts for the 3500 protection system of the ALSTOM turbine.

  • 2026

    PrJSC Azot, Cherkasy · Ukraine

    Configuration and tuning of the System 1 diagnostic software for the urea units supplied in 2024.

  • 2026

    PGE Energia Ciepła – Bydgoszcz CHP · Poland

    Inspection of the Bently Nevada special measurement system on turbine set TG2.

  • 2026

    Dunamenti Erőmű, Százhalombatta · Hungary

    Supply, installation and commissioning of an Orbit 60 monitoring system.

  • 2026

    PGE Energia Ciepła – Gdańsk CHP · Poland

    Inspection of the Bently Nevada special measurement system on turbine set TG3.

Frequently asked questions

Didn't find your answer? Ask an engineer →

Is Energomechanika an authorised Bently Nevada service provider?

No. Energomechanika is not currently an authorised Bently Nevada partner. We provide independent technical support and diagnostic services for this brand's vibration monitoring and protection systems in service. The work that is possible depends on the system model, the documentation, and access to tools and permissions.

Do you support older Bently Nevada systems?

We have many years of experience in diagnosing and maintaining Bently Nevada installations used on turbines, compressors and other rotating machinery. Whether an older system can be serviced or configured is assessed case by case, based on its model, condition and the documentation available. We do not claim access to tools or parts that the manufacturer restricts.

Can Bently Nevada be integrated with a new diagnostic system?

In some installations, existing Bently Nevada systems can pass data to external diagnostic tools through the interfaces available. We design the integration taking into account the signal types, the communication architecture and the requirements of the protection system. Before implementation, we check what the specific configuration allows.

Do you work on 3500 and Orbit 60 systems?

Yes. We support both — from diagnostics and configuration to upgrades and integration.

Can you help with a System 1 migration?

Yes. We support System 1 configuration and migration.

Bently Nevada, 3500, Orbit 60 and System 1 are trademarks of Baker Hughes.

Need a diagnosis or a quote?

Basic machine data and a short description are enough.